/* *****************************************************************
 *    File Name : CY7C291.D
 *    Last Modify Date : 91. 2. 27 
 *
 *    Device 	: CYPRESS  7C291/2 (Reprogrammable PROM)
 *    Pin num	: 24-pin   (A0..A10	D0..D7)
 *    Size	: 16K (7FF)
 *    LOP	: 4
 *    Vpp	: 12.5		Vcc = 5.0	Dur = 200us
 * ***************************************************************** */
declaration
   dataunit : byte;
   functions
      Program
      Read
      Verify
      Blank_Check
      Data_Compare
      Auto      
   ;
   Manufacturers
      CYPRESS
   ;
   Devices
      D7C291
      D7C292	   
   ;
   chips = A7, A6, A5, A4, A3, A2, A1, A0, D0, D1, D2, GND,
	   D3, D4, D5, D6, D7, CS3, CS2, CS1, A10, A9, A8, Vcc;
   $v2 = CS1;
   $v3 = Vcc;
endd

/* -----------------------------------------------------------------------
 * Failf () ---> Fail address setting
 * ----------------------------------------------------------------------- */
int Failf (hwhb, hwlb, lwhb, lwlb, tmp)
int hwhb, hwlb, lwhb, lwlb, tmp;
{
int high, low;

   high = (hwhb << 8) | hwlb;
   low  = (lwhb << 8) | lwlb;

   @Fail high, low, tmp;
}
/* ----------------------------------------------------------------------
 * init () ---> Initial processing
 * ----------------------------------------------------------------------- */
int     init (vol2, vol3)
voltage vol2, vol3;
{
   @Vout 2	, vol2;            /* Voltage Source #2 */
   @Vout 3	, vol3;            /* Voltage Source #3 */
   @Out GND     , @G;       /* Ground output */
   @Delay 10	, @ms;

   @Out D [0..7] , @W;       /* ------------------------ */
   @Out A [0..7] , @W;       /*                          */
   @Out A [8..10], @W;
   @Out Vcc	 , @W;
    
   @Out CS1	 , @W;
   @Out CS2	 , @W;	     /*   PGM	*/	
   @Out	CS3	 , @W;	     /*   VFY	*/	

   @Out Vcc	 , @L;

   @Out Vcc      , @O;       /* Vcc Enable */
   @Delay 100	 , @us;
}
/* -----------------------------------------------------------------------
 * InitProcess () ---> Initial Buffer | Voltage source
 * ----------------------------------------------------------------------- */
int InitProcess ()
{
   if (FUNCTION != Program) init ( 5.0 , 5.0 );
   else                     init ( 12.5, 5.0 );

}
/* -----------------------------------------------------------------------
 * read () ---> read processing
 * ----------------------------------------------------------------------- */
int read (row)
int	row;
{
int  hwhb, hwlb, lwhb, lwlb;
int  sll, ell, slh, elh;
int  tmp, tmp2;

   lwlb = lwhb = hwhb = hwlb = 0;
   sll = ell = slh = elh = tmp = tmp2 = 0;
   
   @Set	B_HADDR, B_LADDR;   
   @Inc	__B_START__;
   
   @Out D [0..7], @Z;	/* Data Input  */
   
   if (FUNCTION == Read ) 
   {
      @Display 26, row, "Reading...";
      @CheckSumON;
   }
   else if (FUNCTION == Verify)		@Display 26, row, "Verifying...";
   else if (FUNCTION == Blank_Check)	@Display 26, row, "Blank Checking...";
   else 			        @Display 26, row, "Data Comparing...";
   
   for ( hwhb=0 /* S_HWHB */ ; hwhb<=0 /* E_HWHB */; hwhb++ )
   {
      @Display 64, 9, hwhb;
      for ( hwlb=0 /* S_HWLB */; hwlb<=0 /* E_HWLB */; hwlb++ )
      {
         if (hwlb == S_HWLB) slh = S_LWHB;
         else		     slh = 0;
         if (hwlb == E_HWLB) elh = E_LWHB;
         else                elh = 0xFF;	 
         
         for ( lwhb=slh; lwhb <=elh; lwhb++)
         {
            @Display 68, 9, lwhb;
	    @Out A [8..10], lwhb;   /* Output High word address */
	    
	    if (lwhb == S_LWHB) sll = S_LWLB;
            else                sll = 0;
            if (lwhb == E_LWHB) ell = E_LWLB;
            else                ell = 0xFF;

	    for ( lwlb=sll; lwlb<=ell; lwlb++)      
	    {
 	       @Out CS1	    , @L;
	       @Out CS2	    , @H;
	       @Out CS3	    , @H;                    	
	       @Out A [0..7], lwlb;    /* Low  byte address output */
	       @In  D [0..7], tmp;
	       @Out CS1	    , @H;
	       @Out CS2	    , @L;
	       @Out CS3	    , @L;

	       if (FUNCTION == Read)	  	@Load tmp;
	       else if (FUNCTION == Blank_Check)
	       {
		  if (tmp != 0xFF) Failf (hwhb, hwlb, lwhb, lwlb, tmp);
	       }
	       else if (FUNCTION == Verify)
	       {
                  @Store tmp2;
                  if (tmp != tmp2) Failf (hwhb, hwlb, lwhb, lwlb, tmp);
               }
               if (FUNCTION == Data_Compare)
	       {
	          @Store tmp2;
	          @Compare tmp, tmp2;
	       }	       
	       @Inc SPLIT;
            }
	 }
      }
   }
   if 	   (FUNCTION == Read)		@Display 26, row, "Read OK!   ";
   else if (FUNCTION == Verify)		@Display 26, row, "Verification OK!";
   else if (FUNCTION == Blank_Check)	@Display 26, row, "Blank Check OK!  ";
   else 			        @Display 26, row, "Data Comparison OK!";
}
/* -----------------------------------------------------------------------
 * program () ---> Control main
 * ----------------------------------------------------------------------- */
int program (row, kind)
int	row, kind;
{
int  hwhb, hwlb, lwhb, lwlb;
int  sll, ell, slh, elh;
int  tmp , tmp2, failcnt;

   failcnt = lwhb = lwlb = hwhb = hwlb = 0;
   sll = ell =slh = elh = tmp = tmp2 = 0;
   
   @Out CS2	, @H;   
   @Out CS3	, @H;
   @Out CS1	, @H;

   @Out CS1	, @O;
   
   @Set	B_HADDR, B_LADDR;
   @Inc	__B_START__;
   
   @Display 26, row, "Programming...";   
   
   for ( hwhb=0 /* S_HWHB */; hwhb<=0 /* E_HWHB */; hwhb++ )
   {
      @Display 64, 9, hwhb;
      for ( hwlb=0 /* S_HWLB */; hwlb<=0 /* E_HWLB */; hwlb++ )
      {
         if (hwlb == S_HWLB) slh = S_LWHB;
         else		     slh = 0;
         if (hwlb == E_HWLB) elh = E_LWHB;
         else                elh = 0xFF;	 
         
         for ( lwhb=slh; lwhb <=elh; lwhb++)
         {
            @Display 68, 9, lwhb;
	    @Out A [8..10], lwhb;   /* Output High word address */
	    
	    if (lwhb == S_LWHB) sll = S_LWLB;
            else                sll = 0;
            if (lwhb == E_LWHB) ell = E_LWLB;
            else                ell = 0xFF;

	    for ( lwlb=sll; lwlb<=ell; lwlb++)       
	    {
		  @Store tmp;
		  
		  if (tmp == 0xFF)
		  {
		     @Inc SPLIT;
		     continue;
		  }
		  
		  @Out A [0..7], lwlb;
		  @Out D [0..7], tmp;
		  @Out CS3     , @L;
		  @Delay 200   , @us;
		  @Out CS3     , @H;

	          @Out D [0..7], @Z;
		  @Out CS2     , @L;
		  @In  D [0..7], tmp2;
		  @Out CS2     , @H;
		  
		  @Out D [0..7], @W;
		  
		  if ( tmp != tmp2 )
                  {
		     if (failcnt > 4 ) Failf (hwhb, hwlb, lwhb, lwlb, tmp2);
		     else
		     {
			++ failcnt;
			lwlb--;
		     }
                  }
                  else
                  {
                     failcnt = 0;
                     @Inc SPLIT;
                  }
               }
            }
       }
   }
   @Out	CS1,	@F;
   @Display 26, row, "Program OK!   ";
   if (kind == 0)	row = 7;
   else			row = 8;
   FUNCTION = Verify;
   @Vout 3, 5.0;
   read (row);   
}

/* -----------------------------------------------------------------------
 * main () ---> Control main
 * ----------------------------------------------------------------------- */
int main ()
{
   InitProcess();

   if ( FUNCTION == Auto )
   {
	FUNCTION = Blank_Check;
	read (6);

	FUNCTION = Program;
	InitProcess ();
	program(7, 1);
   }
   else if ( FUNCTION == Program ) program(6, 0);
   else 			   read (6);
}
/* ---------------------------- End of program --------------------------- */