/* ******************************************************************************
 *    File Name : 2MBYTE.D (2M Byte-wide EPROM)
 *    Last Modify Date : 91. 3. 5
 *    Pin num : 32-pin	(A0..A17	D0..D7)
 *    Size    : 2M (3FFFF)
 *
 *    1. Vpp=12.75  Vcc=6.25  Dur=100us  
 * 	 Device  : INTEL      27C020
 *		   AMD	      27C020
 *    2. Vpp=12.5   Vcc=6.5   Dur=100us		LOP=10
 *	 Device  : NEC	      27C2001D 		27C2001
 *    3. Vpp=12.5   Vcc=6.0   Dur=200us		LOP=10 
 *    	 Device  : MITSUBISHI	27C201	27C201-PG
 * **************************************************************************** */
declaration
   dataunit : byte;
   functions
      Program      
      Read
      Verify
      Blank_Check
      Data_Compare
      Auto
   ;
   Manufacturers
      AMD
      INTEL
      NEC
      MITSUBISHI
   ;
   Devices
      D27C020 		/*  Vpp=12.75   Vcc=6.25   */
      D27C2001D		/*  Vpp=12.5    Vcc=6.5    */
      D27C2001
      D27C201		/*  3:Vpp=12.5	Vcc=6.0    */
      D27C201_PG
   ;
   chips = Vpp, A16, A15, A12, A7, A6, A5, A4, A3, A2, A1, A0, D0, D1, D2, GND,
	   D3, D4, D5, D6, D7, CE, A10, OE, A11, A9, A8, A13, A14, A17, PGM, Vcc;
   $v2 = Vpp;
   $v3 = Vcc;
endd

/* -----------------------------------------------------------------------
 * Failf () ---> Fail address setting
 * ----------------------------------------------------------------------- */
int Failf (hwhb, hwlb, lwhb, lwlb, tmp)
int hwhb, hwlb, lwhb, lwlb, tmp;
{       		
int high, low;

   high = (hwhb << 8) | hwlb;
   low  = (lwhb << 8) | lwlb;

   @Fail high, low, tmp;
}
/* -----------------------------------------------------------------------
 * init () ---> Initial processing
 * ----------------------------------------------------------------------- */
int     init (vol2, vol3)
voltage vol2, vol3;
{
   @Vout 2	, vol2;            /* Voltage Source #2 */
   @Vout 3	, vol3;            /* Voltage Source #3 */
   @Out GND     , @G;          	   /* Ground output */
   @Delay 10    , @ms;

   @Out D [0..7]  , @W;       /* ------------------------ */
   @Out A [0..7]  , @W;       /*                          */
   @Out A [8..15] , @W;       /*   Initial Direction      */
   @Out A [16..17], @W;

   @Out CE        , @W;       /*         Of               */
   @Out OE        , @W;       /* ------------------------ */
   @Out PGM	  , @W;
   @Out Vcc	  , @W;
   @Out __GANG__[0..3], @W;

   @Out CE       , @H;       /* Chip enable  is High */
   @Out OE       , @H;       /* Out  enable  is High */
   @Out PGM	 , @H;
   @Out Vcc	 , @L;		
   @Out __GANG__[0..3], @H;

   @Out Vcc	 , @O;       /* Vcc Enable */
   @Out Vpp	 , @O;       /* Vpp Enable */
   @Delay 100	 , @us;
}
/* -----------------------------------------------------------------------
 * InitProcess () ---> Initial Buffer | Voltage source
 * ----------------------------------------------------------------------- */
int InitProcess ()
{
   if (FUNCTION != Program) init ( 5.0 , 5.0 );
   else 
   {
       if      (DEVICE == 0)	init (12.75, 6.25);                                  	
       else if (DEVICE < 3)	init (12.5 , 6.5 );
       else			init (12.5,  6.0 );
   }		    
}
/* -----------------------------------------------------------------------
 * read () ---> read processing
 * ----------------------------------------------------------------------- */
int read (row)
int	row;
{
int  hwhb, hwlb, lwhb, lwlb;	/* eaddr : end address */
int  sll, ell, slh, elh, shl, ehl;
int  tmp, tmp2;

   hwhb = hwlb = lwlb = lwhb = 0;
   sll = ell = slh = elh = shl = ehl = tmp = tmp2 = 0;
   
   @Set B_HADDR, B_LADDR;
   @Inc	__B_START__;
   
   @Out D [0..7], @Z;	/* Data Input  */
   
   if (FUNCTION == Read ) 
   {
      @Display 26, row, "Reading...";
      @CheckSumON;
   }
   else if (FUNCTION == Verify)		@Display 26, row, "Verifying...";
   else if (FUNCTION == Blank_Check)	@Display 26, row, "Blank Checking...";
   else 			        @Display 26, row, "Data Comparing...";
   
   for ( hwhb=0 /* S_HWHB */ ; hwhb<=0 /* E_HWHB */; hwhb++ )
   {
      @Display 64, 9, hwhb;
      if (hwhb == S_HWHB) shl = S_HWLB;
      else                shl = 0;
      if (hwhb == E_HWHB) ehl = E_HWLB;
      else                ehl = 0xFF;
      
      for ( hwlb=shl; hwlb<=ehl; hwlb++ )
      {
	 @Display 66, 9, hwlb;
	 @Out A [16..17], hwlb;   /* Output High word address */
	 
	 if (hwlb == S_HWLB) slh = S_LWHB;
         else                slh = 0;
         if (hwlb == E_HWLB) elh = E_LWHB;
         else                elh = 0xFF;

	 for ( lwhb=slh; lwhb<=elh; lwhb++)
         {
	    @Display 68, 9, lwhb;
	    @Out A [8..15], lwhb;   /* Output High word address */
	    
	    if (lwhb == S_LWHB) sll = S_LWLB;
            else                sll = 0;
            if (lwhb == E_LWHB) ell = E_LWLB;
            else                ell = 0xFF;

	    for ( lwlb=sll; lwlb<=ell; lwlb++)
	    {
	       @Out A [0..7], lwlb;    /* Low  byte address output */
	       
	       if (GANG == 0)	@Out CE            , @L;
	       else		@Out __GANG__[GANG], @L;
	       
	       @Out OE      , @L;
	       @In  D [0..7], tmp;
	       
	       if (GANG == 0)	@Out CE	    	   , @H;
	       else		@Out __GANG__[GANG], @H;
	       
	       @Out OE      , @H;
	       
	       if      (FUNCTION == Read)          @Load tmp;
	       else if (FUNCTION == Blank_Check)   /* Blank_Char */
	       {
		    if (tmp != 0xFF)	Failf(hwhb, hwlb, lwhb, lwlb, tmp);
	       }
	       else if (FUNCTION == Verify)
	       {
		   @Store tmp2;
		   if (tmp != tmp2)  Failf (hwhb, hwlb, lwhb, lwlb, tmp);
	       }
	       else if (FUNCTION == Data_Compare)
	       {
	       	    @Store  tmp;
	       	    @Compare	tmp, tmp2;
	       }
	       if (FUNCTION != Blank_Check)	@Inc SPLIT;
            }
	 }
      }
   }
   if 	   (FUNCTION == Read)		@Display 26, row, "Read OK!   ";
   else if (FUNCTION == Verify)		@Display 26, row, "Verification OK!";
   else if (FUNCTION == Blank_Check)	@Display 26, row, "Blank Check OK!  ";
   else 			        @Display 26, row, "Data Comparison OK!";
}
/* -----------------------------------------------------------------------
 * program() ---> Control main
 * ----------------------------------------------------------------------- */
int	program (row, kind)
int	row, kind;
{
int  hwhb, hwlb, lwhb, lwlb;
int  sll, ell, slh, elh, shl, ehl;
int  tmp , tmp2, failcnt, Dur;

   @Set  B_HADDR, B_LADDR;
   @Inc  __B_START__;
   
   Dur= failcnt = lwlb = lwhb = hwhb = hwlb = 0;
   sll = ell = slh = elh = shl = ehl = tmp = tmp2 = 0;
   
   if (DEVICE >= 2)	Dur = 200;
   else			Dur = 100;
	
   @Display 26, row, "Programming...";      
   
   for ( hwhb=0 /* S_HWHB */; hwhb<=0 /* E_HWHB */; hwhb++ )
   {
       @Display 64, 9, hwhb;
       if (hwhb == S_HWHB) shl = S_HWLB;
       else                shl = 0;
       if (hwhb == E_HWHB) ehl = E_HWLB;
       else                ehl = 0xFF;

       for ( hwlb=shl; hwlb<=ehl; hwlb++ )
       {
	   @Display 66, 9, hwlb;
	   @Out A [16..17], hwlb;   /* Output High word address */
	   
	   if (hwlb == S_HWLB) slh = S_LWHB;
           else                slh = 0;
           if (hwlb == E_HWLB) elh = E_LWHB;
           else                elh = 0xFF;

	   for ( lwhb=slh; lwhb<=elh; lwhb++)
	   {
	       @Display 68, 9, lwhb;
	       @Out A [8..15], lwhb;   /* Output High word address */
	       
	       if (lwhb == S_LWHB) sll = S_LWLB;
               else                sll = 0;
               if (lwhb == E_LWHB) ell = E_LWLB;
               else                ell = 0xFF;

	       for ( lwlb=sll; lwlb<=ell; lwlb++)
	       {
		  @Store tmp;
		  
		  if (tmp == 0xFF)	
		  {
		      @Inc  SPLIT;
		      continue;
		  }	
		  
	          @Out A [0..7], lwlb;
		  @Out D [0..7],  tmp;
		  if(GANG == 0)		@Out CE	       	   , @L;
		  else			@Out __GANG__[GANG], @L;
		  
		  @Out PGM	, @L;
		  @Delay Dur	, @us;
		  @Out PGM	, @H;
		  
		  /* -------- One Byte Verify ----------- */
		  @Out D [0..7],  @Z;
		  @Out  OE	, @L;
		  @In  D [0..7], tmp2;

		  @Out OE       , @H;
		  @Out	D [0..7] , @W;

		  if (tmp != tmp2)
                  {
		     if (failcnt > 25) Failf (hwhb, hwlb, lwhb, lwlb,tmp);
		     else
		     {
			++ failcnt;
			lwlb--;
		     }
                  }
		  else
         	  {
		      failcnt = 0;
		      @Inc SPLIT;
		  }
               }
	   }
       }
   }
   @Display 26, row, "Program OK!   ";
   if (kind == 0)	row = 7;
   else			row = 8;
   FUNCTION = Verify;
   @Vout   2, 5.0;
   @Vout   3, 5.0;
   read (row);		/*  Verify  */
}

/* -----------------------------------------------------------------------
 * main () ---> Control main
 * ----------------------------------------------------------------------- */
int main ()
{
   InitProcess();

   if ( FUNCTION == Auto )
   {
	FUNCTION = Blank_Check;
	read (6);

	FUNCTION = Program;
	InitProcess ();
	program(7, 1);
   }
   else if ( FUNCTION == Program ) program(6, 0);
   else if ( FUNCTION == Read )
   {
   	if 	(GANG >= 1 && __B_START__ == 0);
   	else if (GANG == 3 && __B_START__ == 1);
   	else read (6);
   }    
   else 			   read (6);
}
/* ---------------------------- End of program --------------------------- */